MMX Intrinsics各函数介绍
SIMD相关头文件包括:
//#include <ivec.h>//MMX
//#include <fvec.h>//SSE(also include ivec.h)
//#include <dvec.h>//SSE2(also include fvec.h)#include <mmintrin.h> //MMX
#include <xmmintrin.h> //SSE(include mmintrin.h)
#include <emmintrin.h> //SSE2(include xmmintrin.h)
#include <pmmintrin.h> //SSE3(include emmintrin.h)
#include <tmmintrin.h>//SSSE3(include pmmintrin.h)
#include <smmintrin.h>//SSE4.1(include tmmintrin.h)
#include <nmmintrin.h>//SSE4.2(include smmintrin.h)
#include <wmmintrin.h>//AES(include nmmintrin.h)
#include <immintrin.h>//AVX(include wmmintrin.h)
#include <intrin.h>//(include immintrin.h)
mmintrin.h为MMX头文件,其中__m64的定义为:typedef union __declspec(intrin_type) _CRT_ALIGN(8) __m64
{unsigned __int64 m64_u64;float m64_f32[2];__int8 m64_i8[8];__int16 m64_i16[4];__int32 m64_i32[2]; __int64 m64_i64;unsigned __int8 m64_u8[8];unsigned __int16 m64_u16[4];unsigned __int32 m64_u32[2];
} __m64;
mmintrin.h 文件中各函数的介绍 /* General support intrinsics *///Empties the multimedia state,清除MMX寄存器中的内容,即初始化(以避免和浮点数//操作发生冲突),详细说明见参考文献1void _m_empty(void);//_mm_empty//Converts the integer object _I to a 64-bit __m64 object, r0=_I, r1=0__m64 _m_from_int(int _I);//_mm_cvtsi32_si64//Converts the lower 32 bits of the __m64 object _M to an integer, r=_M0int _m_to_int(__m64 _M);//_mm_cvtsi64_si32//Packs the four 16-bit values from _MM1 into the lower four 8-bit values of//the result with signed saturation, and packs the four 16-bit values from _MM2//into the upper four 8-bit values of the result with signed saturation__m64 _m_packsswb(__m64 _MM1, __m64 _MM2);//_mm_packs_pi16//Packs the two 32-bit values from _MM1 into the lower two 16-bit values of the// result with signed saturation, and packs the two 32-bit values from _MM2 into// the upper two 16-bit values of the result with signed saturation__m64 _m_packssdw(__m64 _MM1, __m64 _MM2);//_mm_packs_pi32//Packs the four 16-bit values from _MM1 into the lower four 8-bit values of the//result with unsigned saturation, and packs the four 16-bit values from _MM2 into//the upper four 8-bit values of the result with unsigned saturation__m64 _m_packuswb(__m64 _MM1, __m64 _MM2);//_mm_packs_pu16//_MM1=(_MM10, _MM11, _MM12, _MM13, _MM14, _MM15, _MM16, _MM17),//_MM2=(_MM20, _MM21, _MM22, _MM23, _MM24, _MM25, _MM26, _MM27),//则r=(_MM14, _MM24, _MM15, _MM25, _MM16, _MM26, _MM17, _MM27)__m64 _m_punpckhbw(__m64 _MM1, __m64 _MM2);//_mm_unpackhi_pi8 //_MM1=(_MM10, _MM11, _MM12, _MM13),_MM10为低位,_MM2=(_MM20, _MM21, _MM22, _MM23),//则r=(_MM12, _MM22, _MM13, _MM23)__m64 _m_punpckhwd(__m64 _MM1, __m64 _MM2);//_mm_unpackhi_pi16//MM1=(_MM10, _MM11),_MM10为低位,_MM2=(_MM20, _MM21),则r=(_MM11, _MM21)__m64 _m_punpckhdq(__m64 _MM1, __m64 _MM2);//_mm_unpackhi_pi32//_MM1=(_MM10, _MM11, _MM12, _MM13, _MM14, _MM15, _MM16, _MM17),//_MM2=(_MM20, _MM21, _MM22, _MM23, _MM24, _MM25, _MM26, _MM27),//则r=(_MM10, _MM20, _MM11, _MM21, _MM12, _MM22, _MM13, _MM23)__m64 _m_punpcklbw(__m64 _MM1, __m64 _MM2);//_mm_unpacklo_pi8//_MM1=(_MM10, _MM11, _MM12, _MM13),_MM10为低位,_MM2=(_MM20, _MM21, _MM22, _MM23),//则r=(_MM10, _MM20, _MM11, _MM21)__m64 _m_punpcklwd(__m64 _MM1, __m64 _MM2);//_mm_unpacklo_pi16//MM1=(_MM10, _MM11),_MM10为低位,_MM2=(_MM20, _MM21),则r=(_MM10, _MM20)__m64 _m_punpckldq(__m64 _MM1, __m64 _MM2);//mm_unpacklo_pi32/* Packed arithmetic intrinsics *///Adds the eight 8-bit values in _MM1 to the eight 8-bit values in _MM2__m64 _m_paddb(__m64 _MM1, __m64 _MM2);//_mm_add_pi8//Adds the four 16-bit values in _MM1 to the four 16-bit values in _MM2__m64 _m_paddw(__m64 _MM1, __m64 _MM2);//_mm_add_pi16//Adds the two 32-bit values in _MM1 to the two 32-bit values in _MM2__m64 _m_paddd(__m64 _MM1, __m64 _MM2);//_mm_add_pi32//Adds the eight signed 8-bit values in _MM1 to the eight signed 8-bit values in _MM2//and saturates__m64 _m_paddsb(__m64 _MM1, __m64 _MM2);//_mm_adds_pi8//Adds the four signed 16-bit values in _MM1 to the four signed 16-bit values in _MM2//and saturates__m64 _m_paddsw(__m64 _MM1, __m64 _MM2);//_mm_adds_pi16//Adds the eight unsigned 8-bit values in _MM1 to the eight unsigned 8-bit values //in _MM2 and saturates__m64 _m_paddusb(__m64 _MM1, __m64 _MM2);//_mm_adds_pu8//Add the four unsigned 16-bit values in _MM1 to the four unsigned 16-bit values //in _MM2 and saturates__m64 _m_paddusw(__m64 _MM1, __m64 _MM2);//_mm_adds_pu16//Subtracts the eight 8-bit values in _MM2 from the eight 8-bit values in _MM1__m64 _m_psubb(__m64 _MM1, __m64 _MM2);//_mm_sub_pi8 //Subtracts the four 16-bit values in _MM2 from the four 16-bit values in _MM1__m64 _m_psubw(__m64 _MM1, __m64 _MM2);//_mm_sub_pi16//Subtracts the two 32-bit values in _MM2 from the two 32-bit values in _MM1__m64 _m_psubd(__m64 _MM1, __m64 _MM2);//_mm_sub_pi32//Subtracts the eight signed 8-bit values in _MM2 from the eight signed 8-bit//values in _MM1 and saturates__m64 _m_psubsb(__m64 _MM1, __m64 _MM2);//_mm_subs_pi8//Subtracts the four signed 16-bit values in _MM2 from the four signed 16-bit//values in _MM1 and saturates__m64 _m_psubsw(__m64 _MM1, __m64 _MM2);//_mm_subs_pi16//Subtracts the eight unsigned 8-bit values in _MM2 from the eight unsigned 8-bit//values in _MM1 and saturates__m64 _m_psubusb(__m64 _MM1, __m64 _MM2);//_mm_subs_pu8//Subtracts the four unsigned 16-bit values in _MM2 from the four unsigned 16-bit//values in _MM1 and saturates__m64 _m_psubusw(__m64 _MM1, __m64 _MM2);//_mm_subs_pu16//Multiplies four 16-bit values in _MM1 by four 16-bit values in _MM2 to produce//four 32-bit intermediate results, which are then summed by pairs to produce two//32-bit results,r0=_MM10*_MM20+_MM11*_MM21, r1=_MM12*_MM22+_MM13*_MM23__m64 _m_pmaddwd(__m64 _MM1, __m64 _MM2);//_mm_madd_pi16//Multiplies four signed 16-bit values in _MM1 by four signed 16-bit values in _MM2//and produces the high 16 bits of the four results__m64 _m_pmulhw(__m64 _MM1, __m64 _MM2);//_mm_mulhi_pi16//Multiplies four 16-bit values in _MM1 by four 16-bit values in _MM2 and produces//the low 16 bits of the four results__m64 _m_pmullw(__m64 _MM1, __m64 _MM2);//_mm_mullo_pi16/* Shift intrinsics *///Shifts four 16-bit values in _M left the amount specified by _Count //while shifting in zeros,左移_Count位,移出位补0__m64 _m_psllw(__m64 _M, __m64 _Count);//_mm_sll_pi16//Shifts four 16-bit values in _M left the amount specified by _Ccount while //shifting in zeros,左移_Count位,移出位补0,_Count需是一个立即数//汇编语言中的立即数相当于高级语言中的常量(常数),它是直接出现在指令中的数,//不用存储在寄存器或存储器中的数__m64 _m_psllwi(__m64 _M, int _Count);//_mm_slli_pi16 //Shifts two 32-bit values in _M left the amount specified by _Count//while shifting in zeros__m64 _m_pslld(__m64 _M, __m64 _Count);//_mm_sll_pi32//Shifts two 32-bit values in _M left the amount specified by _Count//while shifting in zeros__m64 _m_pslldi(__m64 _M, int _Count);//_mm_slli_pi32//Shifts the 64-bit value in _M left the amount specified by _Count//while shifting in zeros__m64 _m_psllq(__m64 _M, __m64 _Count);//_mm_sll_si64//Shifts the 64-bit value in _M left the amount specified by _Count//while shifting in zeros__m64 _m_psllqi(__m64 _M, int _Count);//_mm_slli_si64//Shifts four 16-bit values in _M right the amount specified by _Count//while shifting in the sign bit__m64 _m_psraw(__m64 _M, __m64 _Count);//_mm_sra_pi16//Shifts four 16-bit values in _M right the amount specified by _Count//while shifting in the sign bit__m64 _m_psrawi(__m64 _M, int _Count);//_mm_srai_pi16//Shifts two 32-bit values in _M right the amount specified by _Count//while shifting in the sign bit__m64 _m_psrad(__m64 _M, __m64 _Count);//_mm_sra_pi32//Shifts two 32-bit values in _M right the amount specified by _Count//while shifting in the sign bit__m64 _m_psradi(__m64 _M, int _Count);//_mm_srai_pi32//Shifts four 16-bit values in _M right the amount specified by _Count//while shifting in zeros__m64 _m_psrlw(__m64 _M, __m64 _Count);//_mm_srl_pi16//Shifts four 16-bit values in _M right the amount specified by _Count//while shifting in zeros__m64 _m_psrlwi(__m64 _M, int _Count);//_mm_srli_pi16//Shifts two 32-bit values in _M right the amount specified by _Count//while shifting in zeros__m64 _m_psrld(__m64 _M, __m64 _Count);//_mm_srl_pi32//Shifts two 32-bit values in _M right the amount specified by _Count//while shifting in zeros__m64 _m_psrldi(__m64 _M, int _Count);//_mm_srli_pi32 //Shifts the 64-bit value in _M right the amount specified by _Count//while shifting in zeros__m64 _m_psrlq(__m64 _M, __m64 _Count);//_mm_srl_si64//Shifts the 64-bit value in _M right the amount specified by _Count//while shifting in zeros__m64 _m_psrlqi(__m64 _M, int _Count);//_mm_srli_si64/* Logical intrinsics *///Performs a bitwise AND of the 64-bit value in _MM1 with the 64-bit value in _MM2__m64 _m_pand(__m64 _MM1, __m64 _MM2);//_mm_and_si64//Performs a logical NOT on the 64-bit value in _MM1 and use the result in a //bitwise AND with the 64-bit value in _MM2__m64 _m_pandn(__m64 _MM1, __m64 _MM2);//_mm_andnot_si64//Performs a bitwise OR of the 64-bit value in _MM1 with the 64-bit value in _MM2__m64 _m_por(__m64 _MM1, __m64 _MM2);//_mm_or_si64//Performs a bitwise XOR of the 64-bit value in _MM1 with the 64-bit value in _MM2__m64 _m_pxor(__m64 _MM1, __m64 _MM2);//_mm_xor_si64/* Comparison intrinsics *///If the respective 8-bit values in _MM1 are equal to the respective //8-bit values in _MM2, sets the respective 8-bit resulting values to //all ones; otherwise, sets them to all zeros__m64 _m_pcmpeqb(__m64 _MM1, __m64 _MM2);//_mm_cmpeq_pi8//If the respective 16-bit values in _MM1 are equal to the respective //16-bit values in _MM2, sets the respective 16-bit resulting values //to all ones; otherwise, sets them to all zeros__m64 _m_pcmpeqw(__m64 _MM1, __m64 _MM2);//_mm_cmpeq_pi16//If the respective 32-bit values in _MM1 are equal to the respective //32-bit values in _MM2, sets the respective 32-bit resulting values//to all ones; otherwise, sets them to all zeros__m64 _m_pcmpeqd(__m64 _MM1, __m64 _MM2);//_mm_cmpeq_pi32 //If the respective 8-bit values in _MM1 are greater than the respective //8-bit values in _MM2, sets the respective 8-bit resulting values to all ones;//otherwise, sets them to all zeros__m64 _m_pcmpgtb(__m64 _MM1, __m64 _MM2);//_mm_cmpgt_pi8//If the respective 16-bit values in _MM1 are greater than the respective 16-bit//values in _MM2, sets the respective 16-bit resulting values to all ones;//otherwise, sets them to all zeros__m64 _m_pcmpgtw(__m64 _MM1, __m64 _MM2);//_mm_cmpgt_pi16//If the respective 32-bit values in _MM1 are greater than the respective 32-bit//values in _MM2, sets the respective 32-bit resulting values to all ones;//otherwise, sets them all to zeros__m64 _m_pcmpgtd(__m64 _MM1, __m64 _MM2);//_mm_cmpgt_pi32/* Utility intrinsics *///Sets the 64-bit value to zero__m64 _mm_setzero_si64(void);//Sets the two signed 32-bit integer values,r0=_I0, r1=_I1__m64 _mm_set_pi32(int _I1, int _I0);//r0=_S0, r1=_S1, r2=_S2, r3=_S3__m64 _mm_set_pi16(short _S3, short _S2, short _S1, short _S0);//r0=_B0, r1=_B1, r2=_B2, r3=_B3, r4=_B4, ..., r7=_B7__m64 _mm_set_pi8(char _B7, char _B6, char _B5, char _B4,char _B3, char _B2, char _B1, char _B0);//Sets the two signed 32-bit integer values to _I,r0=r1=_I__m64 _mm_set1_pi32(int _I);//Sets the four signed 16-bit integer values to _S, r0=r1=r2=r3=_S__m64 _mm_set1_pi16(short _S);//Sets the eight signed 8-bit integer values to _B, r0=r1...=r7=_B__m64 _mm_set1_pi8(char _B);//Sets the two signed 32-bit integer values in reverse order,r0=_I1, r1=_I0__m64 _mm_setr_pi32(int _I1, int _I0);//Sets the four signed 16-bit integer values in reverse order,//r0=_S3, r1=_S2, r2=_S1, r3=_S0__m64 _mm_setr_pi16(short _S3, short _S2, short _S1, short _S0);//Sets the eight signed 8-bit integer values in reverse order//r0=_B7, r1=_B6, r2=_B5, r3=_B4, r4=_B3, r5=_B2, r6=_B1, r7=_B0__m64 _mm_setr_pi8(char _B7, char _B6, char _B5, char _B4,char _B3, char _B2, char _B1, char _B0);/* Alternate intrinsic name definitions */#define _mm_empty _m_empty#define _mm_cvtsi32_si64 _m_from_int#define _mm_cvtsi64_si32 _m_to_int#define _mm_packs_pi16 _m_packsswb#define _mm_packs_pi32 _m_packssdw#define _mm_packs_pu16 _m_packuswb#define _mm_unpackhi_pi8 _m_punpckhbw#define _mm_unpackhi_pi16 _m_punpckhwd#define _mm_unpackhi_pi32 _m_punpckhdq#define _mm_unpacklo_pi8 _m_punpcklbw#define _mm_unpacklo_pi16 _m_punpcklwd#define _mm_unpacklo_pi32 _m_punpckldq#define _mm_add_pi8 _m_paddb#define _mm_add_pi16 _m_paddw#define _mm_add_pi32 _m_paddd#define _mm_adds_pi8 _m_paddsb#define _mm_adds_pi16 _m_paddsw#define _mm_adds_pu8 _m_paddusb#define _mm_adds_pu16 _m_paddusw#define _mm_sub_pi8 _m_psubb#define _mm_sub_pi16 _m_psubw#define _mm_sub_pi32 _m_psubd#define _mm_subs_pi8 _m_psubsb#define _mm_subs_pi16 _m_psubsw#define _mm_subs_pu8 _m_psubusb#define _mm_subs_pu16 _m_psubusw#define _mm_madd_pi16 _m_pmaddwd#define _mm_mulhi_pi16 _m_pmulhw#define _mm_mullo_pi16 _m_pmullw#define _mm_sll_pi16 _m_psllw#define _mm_slli_pi16 _m_psllwi#define _mm_sll_pi32 _m_pslld#define _mm_slli_pi32 _m_pslldi#define _mm_sll_si64 _m_psllq#define _mm_slli_si64 _m_psllqi#define _mm_sra_pi16 _m_psraw#define _mm_srai_pi16 _m_psrawi#define _mm_sra_pi32 _m_psrad#define _mm_srai_pi32 _m_psradi#define _mm_srl_pi16 _m_psrlw#define _mm_srli_pi16 _m_psrlwi#define _mm_srl_pi32 _m_psrld#define _mm_srli_pi32 _m_psrldi#define _mm_srl_si64 _m_psrlq#define _mm_srli_si64 _m_psrlqi#define _mm_and_si64 _m_pand#define _mm_andnot_si64 _m_pandn#define _mm_or_si64 _m_por#define _mm_xor_si64 _m_pxor#define _mm_cmpeq_pi8 _m_pcmpeqb#define _mm_cmpeq_pi16 _m_pcmpeqw#define _mm_cmpeq_pi32 _m_pcmpeqd#define _mm_cmpgt_pi8 _m_pcmpgtb#define _mm_cmpgt_pi16 _m_pcmpgtw#define _mm_cmpgt_pi32 _m_pcmpgtd
参考文献:1、http://software.intel.com/sites/products/documentation/studio/composer/en-us/2011Update/compiler_c/intref_cls/common/intref_mmx_emms_usage.htm
相关文章:

大数据中台向AI中台演进是大势所趋?
来源 | 宜信技术学院(ID:CE_TECH)导读:自从阿里巴巴提出“中台”的概念之后,这个词汇就成为各领域企业关注的焦点,很多人在考虑建设自己的中台。然而,构建中台是否真有必要?是否所有的企业都要建…

WordPress标签
1、分类目录调用函数: <?php wp_list_cats();?> 2、调用页面函数: <?php wp_nav_menu( array( theme_location > ast-menu-primary, container > false ) ); ?> 3、转载于:https://blog.51cto.com/okowo/…

SSE3和SSSE3 Intrinsics各函数介绍
SIMD相关头文件包括: //#include <ivec.h>//MMX //#include <fvec.h>//SSE(also include ivec.h) //#include <dvec.h>//SSE2(also include fvec.h)#include <mmintrin.h> //MMX #include <xmmintrin.h> //SSE(include mmintrin.h) #…

kubernetes学习笔记之十三:基于calico的网络策略入门
一、.安装calico [rootk8s-master01 ~]# kubectl apply -f https://docs.projectcalico.org/v3.3/getting-started/kubernetes/installation/hosted/canal/rbac.yaml clusterrole.rbac.authorization.k8s.io "calico" created clusterrole.rbac.authorization.k8s.i…
设计模式之抽象工厂模式(Abstract Factory)摘录
面向对象系统的分析和设计实际上追求的就是两点:高内聚(Cohesion)和低耦合(Coupling). 23种GOF设计模式一般分为三大类:创建型模式、结构型模式、行为模式。 创建型模式包括:1、FactoryMethod(工厂方法模式);2、Abstract Factor…

grub设置密码的方法
grub设置密码的方法:一、grub设置明文口令的方法:修改/etc/grub.conf配置文件就可以了.[root RedHat ~] # vi /etc/grub.conf #注:此为链接文件,指向 /boot/grub/grub.conf#boot/dev/hdbdefault0timeout5splashimage(hd0,0)/gr…

web服务器(IIS)的操作步骤
转载于:https://blog.51cto.com/14118520/2335646

微软全球AI总监:Azure AI是OpenAI技术商业化变现唯一、排他性合作方
作者 | 夕颜出品 | AI科技大本营(ID:rgznai100)导读:7 月 24 日下午,微软在北京举行了媒体交流会。会上,微软全球副总裁,人工智能平台负责人 Eric Boyd 介绍了 Azure AI 近期的最新进展情况,并带…

NYOJ_16_矩形嵌套
有点小坑的严格单调递增序列,主要是排序那里坑了一下。 思路:矩形的嵌套? (a<c&&b<d)||(a<d&&b<c)? 不,只要在建点时保证a<b,条件就会少一个,直接a<c&&b<…

抢程序员饭碗?自动写代码的Deep TabNine真如此神奇?
作者 | James Vincent等编译 | 夕颜出品 | AI科技大本营(ID:rgznai100)导读:在过去的一年中,AI 生成书面文字的能力大大提高。通过扫描庞大的文本数据集,机器学习软件可以生成从短篇小说到歌词的各种令人信服的样本。…
JS 总结之事件循环
众所周知,JavaScript 为了避免复杂,被设计成了单线程。 ⛅️ 任务 单线程意味着所有任务都需要按顺序执行,如果某个任务执行非常耗时,线程就会被阻断,后面的任务需要等上一个任务执行完毕才会进行。而大多数非常耗时的…
设计模式之工厂方法模式(Factory Method)摘录
23种GOF设计模式一般分为三大类:创建型模式、结构型模式、行为模式。 创建型模式包括:1、FactoryMethod(工厂方法模式);2、Abstract Factory(抽象工厂模式);3、Singleton(单例模式);4、Builder(建造者模式);…

SpanBERT:提出基于分词的预训练模型,多项任务性能超越现有模型!
作者 | Mandar Joshi, Danqi Chen, Yinhan Liu, Daniel S. Weld, Luke Zettlemoyer, Omer Levy译者 | Rachel责编 | Jane出品 | AI科技大本营(ID: rgznai100)【导读】本文提出了一个新的模型预训练方法 SpanBERT ,该方法能够更好地表示和预测…

XP与Windows 7(Win7)等操作系统Ghost备份
XP与Windows 7(Win7)等操作系统Ghost备份 2013年5月5日 前提:备份还原win7的话,此种Ghost备份方法只针对没有100MB保留分区的win7安装方式。去掉100MB的方法可以参考《Windows7(win7)系统重装与破解》&…

SSE4.1和SSE4.2 Intrinsics各函数介绍
SIMD相关头文件包括: //#include <ivec.h>//MMX //#include <fvec.h>//SSE(also include ivec.h) //#include <dvec.h>//SSE2(also include fvec.h)#include <mmintrin.h> //MMX #include <xmmintrin.h> //SSE(include mmintrin.h) #…

Nacos v0.7.0:对接CMDB,实现基于标签的服务发现能力
Nacos近期发布了0.7.0版本,该版本支持对接第三方CMDB获取CMDB数据、使用Selector机制来配置服务的路由类型、支持单机模式使用MySQL数据库、上线Node.js客户端,并修复了一些bug。对接CMDB实现就近访问在服务进行多机房或者多地域部署时,跨地域…

数十篇推荐系统论文被批无法复现:源码、数据集均缺失,性能难达预期
作者 | Maurizio Ferrari Dacrema译者 | 凯隐责编 | Jane出品 | AI科技大本营(ID: rgznai100)【导读】来自意大利米兰理工大学的 Maurizio 团队近日发表了一篇极具批判性的文章,剑指推荐系统领域的其他数十篇论文,指出这些论文中基…

crontab 总结
2019独角兽企业重金招聘Python工程师标准>>> 1.写法 每三天执行一次:0 0 */3 * * root command,注意:* * */3 * * root command 这样写是不对的。其它每N小时执行一次也类似 (后续补充) 转载于:https://…

ubuntu安装thrift
ubuntu环境下安装thrift-0.10.0 1.解压 2.编译安装 ./configure -with-cpp -with-boost -without-python -without-csharp -with-java -without-erlang -without-perl -with-php -without-php_extension -without-ruby -without-haskell -without-go make sudo make install3.是…

AES(Advanced Encryption Standard) Intrinsics各函数介绍
AES为高级加密标准,是较流行的一种密码算法。 SIMD相关头文件包括: //#include <ivec.h>//MMX //#include <fvec.h>//SSE(also include ivec.h) //#include <dvec.h>//SSE2(also include fvec.h)#include <mmintrin.h> //MMX #…

轻松应对Java试题,这是一份大数据分析工程师面试指南
作者 | HappyMint转载自大数据与人工智能(ai-big-data)导语:经过这一段时间与读者的互动与沟通,本文作者发现很多小伙伴会咨询面试相关的问题,特别是即将毕业的小伙伴,所以决定输出一系列面试相关的文章。本…

【Elasticsearch 5.6.12 源码】——【3】启动过程分析(下)...
版权声明:本文为博主原创,转载请注明出处!简介 本文主要解决以下问题: 1、ES启动过程中的Node对象都初始化了那些服务?构造流程 Step 1、创建一个List暂存初始化失败时需要释放的资源,并使用临时的Logger对…

C++中的封装、继承、多态
封装(encapsulation):就是将抽象得到的数据和行为(或功能)相结合,形成一个有机的整体,也就是将数据与操作数据的源代码进行有机的结合,形成”类”,其中数据和函数都是类的成员。封装的目的是增强安全性和简化编程&…

比尔盖茨护犊子 称iPad让大批用户沮丧
为什么80%的码农都做不了架构师?>>> 在5月6日接受美国CNBC电视台访问时,微软前任掌门人比尔盖茨维护了自家反响不那么好的Surface系列平板电脑,同时他还不忘吐槽了一把iPad。 当 谈到日渐颓败的PC市场时,盖茨称平板电…

小心陷阱:二维动态内存的不连续性
void new_test() {int** pp;pp new int*[10];for(int i0; i<10; i){pp[i] new int[10];}//pp[0], pp[1], ... , pp[9]在内存中连续;//a1 pp[0][0], pp[0][1], ... , pp[0][9]在内存中也是连续的;//a2 pp[1][0], pp[1][1], ... , pp[1][9]在内存中也是连续的;//...//a9 …

超酷炫!Facebook用深度学习和弱监督学习绘制全球精准道路图
作者 | Saikat Basu等译者 | 陆离责编 | 夕颜出品 | AI科技大本营(ID: rgznai100)导读:现如今,即使可以借助卫星图像和绘制软件,创建精确的道路图也依然是一个费时费力的人力加工过程。许多地区,特别是在发…
npm包发布记录
下雪了,在家闲着,不如写一个npm 包发布。简单的 npm 包的发布网上有很多教程,我就不记录了。这里记录下,一个复杂的 npm 包发布,复杂指的构建环境复杂。 整个工程使用 rollup 来构建,其中会引进 babel 来转…
设计模式之单例模式(Singleton)摘录
23种GOF设计模式一般分为三大类:创建型模式、结构型模式、行为模式。 创建型模式包括:1、FactoryMethod(工厂方法模式);2、Abstract Factory(抽象工厂模式);3、Singleton(单例模式);4、Builder(建造者模式)࿱…

关于知识蒸馏,这三篇论文详解不可错过
作者 | 孟让转载自知乎导语:继《从Hinton开山之作开始,谈知识蒸馏的最新进展》之后,作者对知识蒸馏相关重要进行了更加全面的总结。在上一篇文章中主要介绍了attention transfer,FSP matrix和DarkRank,关注点在于寻找不…
设计模式之建造者模式(生成器模式、Builder)摘录
23种GOF设计模式一般分为三大类:创建型模式、结构型模式、行为模式。 创建型模式包括:1、FactoryMethod(工厂方法模式);2、Abstract Factory(抽象工厂模式);3、Singleton(单例模式);4、Builder(建造者模式、生成器模式…